Changelog
1.2.0
- Added: the band path of ext-display 1.1 (40-row bands, the panel keeps its picture), used by renderers such as Slate. Requires php-baremetal/ext-display ^1.1.
- Added: the band path gives the order of the panel's refresh (
scan: top to bottom, bottom to top withmirror_y, across the columns withswap_xy), so a renderer paced on TE can write without tearing. - Changed: the two 20-row ping-pong bands of
flush()(2 x 14 400 bytes of internal RAM on a 360-wide panel) are allocated by the first flush that needs them instead of by the constructor, so a renderer on the band path (Slate) leaves that RAM free. - Fixed: the end of a band's DMA woke the flush task only at the next system tick (up to 1 ms later): esp_lcd's SPI IO drops the return value of the transfer-done callback, so the driver now asks for the task switch itself. Every band and region is handed back sooner; a full-screen frame of Slate takes about 12.8 ms instead of 15.3 ms.
- Changed: the column window (CASET) is sent only when it changes, so the bands of one region cost one command less.
1.1.0
- Added: ide/esp32-display-st77916.stub, the PHP declarations of the package for IDEs (conductor copies it into vendor/php-baremetal/ide-stubs/).
- Added: asynchronous flush:
flush()returns at once, and a flush task on core 1 sends the region through two ping-pong bands of 20 rows in internal RAM (the same memory as the 40-row band before), gathering one band while the other is in DMA. - Added: constructor options
te(the TE pin),buffered(a copy of the framebuffer that the panel reads) andvsync(each region starts at the next TE pulse;\ValueErrorwithoutte;sleep()andwake()drop a region still waiting for the pulse);onboard()takesbufferedandvsync, and the TE pin from the block's optionaltekey. - Added: St77916::REFRESH_HZ and refreshRate() (Output\Display): the panel's nominal refresh rate, 60 Hz.
- Changed: St77916 is a panel of ext-display: it gets every Output\Display method (framebuffer, primitives, text, region flush); rect() now draws an outline, fill() is clear() + flush().
- Changed: requires php-baremetal/ext-spi ^1.1: ext-spi 1.0.2 still registers Output\Display, which ext-display now owns.
- Added: St77916::onboard(), from the board's display block.
- Added: extra.baremetal.board-blocks: ["display:st77916"], so phpbm offers this package as a board feature.
1.0.2
- Fixed:
wake()re-initialised the panel but left the backlight pin as the sleep left it. It now drives the backlight high again, as the constructor does. - Fixed:
$cs,$rstand$blwere not checked. A value outside -1 to 255 now throws\ValueError(must be a GPIO number or -1), as for the ext-spi 1.0.2 constructors. - Docs:
$widthand$heightare the drawing area, so with$swap_xyon a panel that is not square they are passed swapped.
1.0.1
- Changed: the author's contact email.
- Docs: projects use
"sdk": "esp32@^2.0".
1.0.0
Initial release.