ext-led · Recipe
Rainbow strip
A rotating HSV rainbow on a strip of WS2812 pixels: fill the buffer with hsv(), send it with show(), shift the hue each frame.
A 30-pixel WS2812 strip with its data line on GPIO 5 of an ESP32-S3-DevKitC-1, powered from its own 5 V supply
with the ground shared with the board. Change the pin and PIXELS to match your strip.
{
"name": "acme/rainbow-strip",
"type": "project",
"repositories": [
{ "type": "composer", "url": "https://repository.php-baremetal.com", "canonical": true }
],
"require": {
"php-baremetal/conductor": "^1.0",
"php-baremetal/ext-sys": "^1.0",
"php-baremetal/led-ws2812": "^1.0"
},
"config": {
"allow-plugins": { "php-baremetal/conductor": true },
"platform": { "php": "8.5.11" }
},
"extra": {
"baremetal": {
"sdk": "esp32@^2.0",
"board": "espressif-esp32-s3-devkitc-1-n8r8",
"runtime": "init-loop",
"storage": "embedded"
}
}
}
The script
<?php
use Baremetal\Led\Driver\Ws2812;
const PIN = 5;
const PIXELS = 30;
const BRIGHT = 48; // 0 to 255
$strip = new Ws2812(PIN, PIXELS); // GRB, the usual order for strips
function loop(int $tick): void
{
global $strip;
$shift = ($tick * 4) % 360;
for ($i = 0; $i < PIXELS; $i++) {
$strip->hsv($i, $shift + intdiv($i * 360, PIXELS), 255, BRIGHT);
}
$strip->show();
delay(20);
}
- Each frame writes all 30 pixels into the buffer, then sends them with one
show(). - Hue values above 359 wrap, so
$shift + ...needs no modulo. - If the colours come out swapped (red shows green), the strip is in
RGBorder: passWs2812::RGB. - A 3.3 V data line usually drives a 5 V strip over a short wire; for long runs add a level shifter.
Related
- LED devices PHP API
- Errors and limits Reference